Winter debris covers are manufactured 1ft larger than the pool all around the perimeter from a woven polyethylene UV stabilised material. This forms a protective layer over the pool reducing the risk of frost damage to the pool underneath and discolouration from leaves and other debris that may fall into the pool during winter.

They are supplied in a green/black or blue/black finish with three fixing types – economy, deluxe and Flush-Fix. Economy fittings are made up of “P” anchors complete with “D” ring and buckles. The Deluxe fitting is a combination of a “P” anchor with an integral stainless steel spring and slide bar buckle.

Plastic plugs are provided to slot into the holes when the cover is not in use.

The brass Flush-Fix anchor fitting comprises of an in-ground brass fixing which can be set into paving or any surrounding concrete area with a stainless steel spring and side bar buckle.

Economy and deluxe fittings require a 6mm drill whilst Flush-Fix require a 20mm drill.

Strap spacing is normally between 0.9m – 1.5m (3ft – 5 ft) on the width and 1.2m – 1.5m (4 ft – 5 ft) along the length. There is an additional cost for closer spacing of the straps.